Glass Splashbacks For Kitchens

DESIGN YOUR OWN KITCHEN SPLASHBACK

CHOOSE A COLOUR Colour options WE MATCH ANY PAINT RANGE
We can colour your glass to match any paint range, the main paint manufacturer's colours are listed here [click the CLICK HERE button to browse]. If you need a colour that is not listed here get in touch with us on 0808 2540007 to place your order as we can match ANY colour!

If you would prefer clear glass, or tinted glass, we can supply that too- again just use the CLICK HERE button to see the transparent options.
 
ENTER SIZE WIDTH (mm) WIDTH OF GLASS REQUIRED
We advise you deduct 3mm from the actual width if fitting between any fixed surfaces (for example between two wall units).
HEIGHT (mm) HEIGHT OF GLASS REQUIRED
We advise you deduct 3mm from the actual height required if fitting between any fixed surfaces (for example between your worktop and cooker hood).

SELECT A FIXING OPTION Fixing options SPLASHBACK FITTING OPTIONS
Glass Splashbacks can be screw fitted to the wall using mirror screws, which makes them easier to remove or for a more permanent fixing method you can stick to the wall using our adhesive. We would normally recommend sticking to the wall for a sleeker look (no mirror headed screws will be visible- just beautiful coloured glass).
CLEAR AND TINTED GLASS CANNOT BE FITTED WITH ADHESIVE (as you will see it through the glass)- please select the screw fitting method for these pieces.

WOULD YOU LIKE EASY CLEAN/NON STICK COATING? Fixing options EASY CLEAN COATING
Our easy clean coating is a product called 6K from CR Laurence, it is applied to the glass during production and essentially makes the glass non stick. Unlike products we have used in the past (that can be cleaned off), 6K actually bonds to the surface of the glass meaning your glass stays cleaner for longer.
GLASS THICKNESS Fixing options CHOOSING A GLASS THICKNESS
We can supply our toughened glass in a number of different thicknesses, primarily for different uses.
4mm & 6mm - ideal for use as a Glass Splashback behind your hob, surface protection or table tops. 6mm is the most common but 4mm is perfectly suitable also.
10mm may also be used as a splashback if you wish to match upstand thicknesses, it is also a great table top thickness.
19mm is really only necessary as a worktop but 10mm is actually a very good worktop thickness also.
GLITTER/SPARKLE Fixing options GLITTER FINISHES
It has actually taken us years to source the right glitter suppliers, we now have chunky highly refelective glitter in FIVE different colours.

Example of our Silver glitter finish
sparkle finish glass splashbacks
GLASS FINISH Fixing options GLASS FINISH
We can supply our coloured glass splashbacks in the standard gloss, highly reflective finish, which is of course incredibly popular. However, we now supply Brushed Glass™ (manufactured by Ember Glass) which is a non reflective matt type finish. Brushed glass is not available in white though as we cannot yet order it in Low Iron (Opti White) glass, so it will have a slight green tinge.
CUT OUTS Fixing options SOCKET CUT OUTS OR NOTCHES
Cut outs - If you are fitting the glass around (behind) a plug socket, or pipework etc. then you will need us to cut holes in the glass during the manufacturing process.
Notches - these are mostly necessary if you are fitting around an upstand, perhaps a bit of cornice on your kitchen units (although we would recommend you trim the cornice and fit behind), or perhaps just another obstruction that means you cannot order a simple rectangle...in this scenario we will need to CNC shape the glass for you.
For cut outs and notches, select the number you require and we will be in touch with you after ordering to find out where they go!
ANY SHAPING REQUIRED Shaped Glass Splashbacks SHAPING THE GLASS
If your glass splashback is to fit beneath a shaped cooker hood, we have various models on file. We can also shape our glass using CNC to fit your wall or space in a single panel in an upside down T, T shape, L shape- whatever you require. To see the cooker hood models we have on file or other popular shapes just click the ADD SHAPING button.
 [NOT REQUIRED]

Glass Splashbacks Guide

We believe that your kitchen should fit your lifestyle. This is why we offer the opportunity to customise and personalise all aspects of your splashback from its colour to its shape. Once you've chosen the splashback for your kitchen, we provide a variety of easy fit options to complete your look. Our service includes comprehensive and easy to follow Tutorials for DIY splashback measurement and installation that will ensure your kitchen has a professional finish.

Lime Green Splashbacks
Glass upstands. Usually 100mm tall, and fitted the same way as a splashback, upstands add a touch of colour along with more practical wall protection.

Measuring for your upstands is just as easy. When you make your measurements, ensure you allow for an expansion gap of 2mm between your upstand and where you want your upstand to finish. There's no need for a gap between your upstand and your splashback. This will ensure that you get the best possible fit for your kitchen!

Once you've added the splashback of your choice to your basket, just input the lengths of the upstands you would like, get your new quote and add these too!

Don't worry, after adding your items to your basket, you can review and edit them at checkout to make sure you've got everything you need. If you've any questions, we'll be happy to help.

When your upstands arrive, it's just a matter of preparing and using our adhesive to attach and seal them to your wall, and your new look splashback kitchen will be finished.
Fully Fitted Glass Splashback
Fully fitted Glass Splashbacks.

Fully covered walls of coloured or printed glass are less of a DIY task and more the work of skilled tradesmen and kitchen fitters. There is very little room for error with toughened glass as the glass may not be cut or drilled once toughened. However, fully fitted glass splashbacks brighten up kitchens and look simply stunning once fitted.

As experts in glass, we also offer a full measuring and fitting service for glass splashbacks. Our network of fitters work across mainland UK offering a truly comprehensive service.

We'll take care of everything from design to installation, giving you peace of mind that the job will be done right. Click here to find our more or call our dedicated call centre on 0808 2540007 (Monday - Saturday 9-5).

How to Measure Up for a Glass Splashback

Having a fitted glass splashback behind your cooker can be considerably cheaper than alternatives such as tiles. Why? The simple reason is, you can do it all yourself. You are basically measuring a rectangle (in most cases) and then gluing or screw fitting one glass panel to your wall, it really is that easy..the key to getting a neat fit is all in the measuring. In our tutorial section, we talk you through measuring everything from simple cooker splashbacks to more elaborate shapes. All of our best tips and advice is included in a series of videos along with downloadable pdf guides. Click the play button to see how easy measuring is, or click below to be directed to the tutorials section.

VIEW TUTORIALS

How to Fit a Glass Splashback

Fitting a splashback is as easy, if not more easy than measuring for one! Even a DIY novice won't have a problem. We walk you through the simple process in our range of video tutorials and PDFs. To watch our simple video on how to fit just hit PLAY.
However if you are interested in our measure and fit service, why not contact a member of our team today or click the below button to find out more.

FIND OUT MORE ABOUT OUR FITTING SERVICE

Sign up to our newsletter and
receive all our latest offers!