Coloured Glass Furniture Protectors

DESIGN YOUR OWN FURNITURE PROTECTOR

CHOOSE A COLOUR Colour options WE MATCH ANY PAINT RANGE
We can colour your glass to match any paint range, the main paint manufacturer's colours are listed here [click the CLICK HERE button to browse]. If you need a colour that is not listed here get in touch with us on 0808 2540007 to place your order as we can match ANY colour!

If you would prefer clear glass, or tinted glass, we can supply that too- again just use the CLICK HERE button to see the transparent options.
 
ENTER SIZE WIDTH (mm) WIDTH OF GLASS REQUIRED
We advise you deduct 3mm from the actual width if fitting between any fixed surfaces (for example between two wall units).
HEIGHT (mm) HEIGHT OF GLASS REQUIRED
We advise you deduct 3mm from the actual height required if fitting between any fixed surfaces (for example between your worktop and cooker hood).

SELECT A FIXING OPTION Fixing options SPLASHBACK FITTING OPTIONS
Glass Splashbacks can be screw fitted to the wall using mirror screws, which makes them easier to remove or for a more permanent fixing method you can stick to the wall using our adhesive. We would normally recommend sticking to the wall for a sleeker look (no mirror headed screws will be visible- just beautiful coloured glass).
CLEAR AND TINTED GLASS CANNOT BE FITTED WITH ADHESIVE (as you will see it through the glass)- please select the screw fitting method for these pieces.

WOULD YOU LIKE EASY CLEAN/NON STICK COATING? Fixing options EASY CLEAN COATING
Our easy clean coating is a product called 6K from CR Laurence, it is applied to the glass during production and essentially makes the glass non stick. Unlike products we have used in the past (that can be cleaned off), 6K actually bonds to the surface of the glass meaning your glass stays cleaner for longer.
GLASS THICKNESS Fixing options CHOOSING A GLASS THICKNESS
We can supply our toughened glass in a number of different thicknesses, primarily for different uses.
4mm & 6mm - ideal for use as a Glass Splashback behind your hob, surface protection or table tops. 6mm is the most common but 4mm is perfectly suitable also.
10mm may also be used as a splashback if you wish to match upstand thicknesses, it is also a great table top thickness.
19mm is really only necessary as a worktop but 10mm is actually a very good worktop thickness also.
GLITTER/SPARKLE Fixing options GLITTER FINISHES
It has actually taken us years to source the right glitter suppliers, we now have chunky highly refelective glitter in FIVE different colours.

Example of our Silver glitter finish
sparkle finish glass splashbacks
GLASS FINISH Fixing options GLASS FINISH
We can supply our coloured glass splashbacks in the standard gloss, highly reflective finish, which is of course incredibly popular. However, we now supply Brushed Glass™ (manufactured by Ember Glass) which is a non reflective matt type finish. Brushed glass is not available in white though as we cannot yet order it in Low Iron (Opti White) glass, so it will have a slight green tinge.
CUT OUTS Fixing options SOCKET CUT OUTS OR NOTCHES
Cut outs - If you are fitting the glass around (behind) a plug socket, or pipework etc. then you will need us to cut holes in the glass during the manufacturing process.
Notches - these are mostly necessary if you are fitting around an upstand, perhaps a bit of cornice on your kitchen units (although we would recommend you trim the cornice and fit behind), or perhaps just another obstruction that means you cannot order a simple rectangle...in this scenario we will need to CNC shape the glass for you.
For cut outs and notches, select the number you require and we will be in touch with you after ordering to find out where they go!
SHAPE  

Glass Furniture Protectors

It is very easy to ruin the top of your furniture in any room of your house, drinks spillages, heat from tea and coffee cups, dropping something on it or even the dreaded nail varnish! Protecting these surfaces can in fact enhance the look though with a coloured glass furniture protector. We can make glass furniture protectors to fit the top of your furniture exactly. Not only that but we can also colour match it to the paint in your room or any other paint colour.

How to Measure
Measuring for glass furniture protectors couldn't be any easier, for the most accurate measurements we always recommend using millimetres. So, using a tape measure or long ruler measure the width and length of the surface to be protected. If you are worried about the edges of the glass you can also make it one or two millimetres smaller.
How to Fit
Our furniture protectors can simply be sat on top of your furniture, the weight of the glass will hold it in place. Small rubber feet are also supplied, these can be used or not depending on the look you are going for. Another option, if you wish to clad your furniture and do not intend to remove the glass furniture protector is to stick it down permanently using our adhesive- this is only suitable for our solid colour painted surface protectors as it will be seen through clear or transparent glass.

Sign up to our newsletter and
receive all our latest offers!