My Basket (
Coloured & Clear
Measured & Fitted
Glass Table Tops
Farrow & Ball
DESIGN YOUR OWN GLASS TABLE TOP
WE MATCH ANY PAINT RANGE
We can colour your glass to match any paint range, the main paint manufacturer's colours are listed here [click the CLICK HERE button to browse]. If you need a colour that is not listed here get in touch with us on 0808 2540007 to place your order as we can match ANY colour!
If you would prefer clear glass, or tinted glass, we can supply that too- again just use the CLICK HERE button to see the transparent options.
WIDTH OF GLASS REQUIRED
We advise you deduct 3mm from the actual width if fitting between any fixed surfaces (for example between two wall units).
HEIGHT OF GLASS REQUIRED
We advise you deduct 3mm from the actual height required if fitting between any fixed surfaces (for example between your worktop and cooker hood).
A FIXING OPTION
SPLASHBACK FITTING OPTIONS
Glass Splashbacks can be screw fitted to the wall using mirror screws, which makes them easier to remove or for a more permanent fixing method you can stick to the wall using our adhesive. We would normally recommend sticking to the wall for a sleeker look (no mirror headed screws will be visible- just beautiful coloured glass).
CLEAR AND TINTED GLASS CANNOT BE FITTED WITH ADHESIVE (as you will see it through the glass)- please select the screw fitting method for these pieces.
Add Adhesive/Sealant £7.49
Screw holes and screws £10
WOULD YOU LIKE EASY CLEAN/NON STICK COATING?
EASY CLEAN COATING
Our easy clean coating is a product called 6K from CR Laurence, it is applied to the glass during production and essentially makes the glass non stick. Unlike products we have used in the past (that can be cleaned off), 6K actually bonds to the surface of the glass meaning your glass stays cleaner for longer.
CHOOSING A GLASS THICKNESS
We can supply our toughened glass in a number of different thicknesses, primarily for different uses.
4mm & 6mm - ideal for use as a Glass Splashback behind your hob, surface protection or table tops. 6mm is the most common but 4mm is perfectly suitable also.
10mm may also be used as a splashback if you wish to match upstand thicknesses, it is also a great table top thickness.
19mm is really only necessary as a worktop but 10mm is actually a very good worktop thickness also.
It has actually taken us years to source the right glitter suppliers, we now have chunky highly refelective glitter in FIVE different colours.
Example of our Silver glitter finish
We can supply our coloured glass splashbacks in the standard gloss, highly reflective finish, which is of course incredibly popular. However, we now supply Brushed Glass™ (manufactured by Ember Glass) which is a non reflective matt type finish. Brushed glass is not available in white though as we cannot yet order it in Low Iron (Opti White) glass, so it will have a slight green tinge.
SOCKET CUT OUTS OR NOTCHES
Cut outs - If you are fitting the glass around (behind) a plug socket, or pipework etc. then you will need us to cut holes in the glass during the manufacturing process.
Notches - these are mostly necessary if you are fitting around an upstand, perhaps a bit of cornice on your kitchen units (although we would recommend you trim the cornice and fit behind), or perhaps just another obstruction that means you cannot order a simple rectangle...in this scenario we will need to CNC shape the glass for you.
For cut outs and notches, select the number you require and we will be in touch with you after ordering to find out where they go!
GLASS SPLASHBACKS CAN BE SHAPED TO FIT COOKER HOOD PROFILES, WE HAVE MANY SHAPES ON FILE. FOR T AND U SHAPES WE WILL REQUIRE A DRAWING OR IMAGE FILE FROM YOU AFTER YOU ORDER
UPSIDE DOWN T
Glass Table Tops
High gloss or matt coloured glass table tops are a very modern and stylish way to give a table a bespoke finish to suit any room's decor. Available in a number of thicknesses, colours, digitally printed designs and in a matt or high gloss finish all of our glass table tops are made from toughened glass.
Please note that as most people wish to have a clear glass table top in float glass (with the green tint) rather than low iron (opti clear) glass we have adjusted our prices accordingly and therefore our table top prices are lower than our glass splashback prices which are on low iron glass. If you would like a low iron table top please order via the
glass splashbacks quote
Sign up to our newsletter and
receive all our latest offers!
Terms and conditions